Digilent 410-044-10P-KIT Manual de usuario descargar pdf (Pagina 9)

Spartan-3 Starter Kit Board User Guide www.xilinx.com 9

UG130 (v1.1) May 13, 2005 1-800-255-7778

Component Locations

• 50 MHz crystal oscillator clock source (bottom side of board, see Figure 1-3)

• Socket for an auxiliary crystal oscillator clock source

• FPGA configuration mode selected via jumper settings

• Push button switch to force FPGA reconfiguration (FPGA configuration happens

automatically at power-on)

• LED indicates when FPGA is successfully configured

• Three 40-pin expansion connection ports to extend and enhance the Spartan-3 Starter

Kit Board

♦ See www.xilinx.com/s3boards for compatible expansion cards

♦ Compatible with Digilent, Inc. peripheral boards

https://digilent.us/Sales/boards.cfm#Peripheral

♦ FPGA serial configuration interface signals available on the A2 and B1 connectors

- PROG_B, DONE, INIT_B, CCLK, DONE

• JTAG port for low-cost download cable

• Digilent JTAG download/debugging cable connects to PC parallel port

• JTAG download/debug port compatible with the Xilinx Parallel Cable IV and

MultiPRO Desktop Tool

• AC power adapter input for included international unregulated +5V power

supply

• Power-on indicator LED

• On-board 3.3V , 2.5V , and 1.2V regulators

Component Locations

Figure 1-2 and Figure 1-3 indicate the component locations on the top side and bottom side

of the board, respectively.

19 20 21

22 23

27 28 29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Sin comentarios

Digilent 410-044-10P-KIT Manual de usuario Pagina 9