Digilent 410-211P-KIT Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Hardware Digilent 410-211P-KIT. Digilent 410-211P-KIT User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
chipKITNetwork Shield Board Reference Manual
Revised December 29, 2014
This manual applies to the chipKIT Network Shield rev. E
DOC#: 502-211
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 1 of 10
Overview
The chipKIT Network Shield is an input/output expansion board designed for use with the chipKIT Max32™
microcontroller board. It has circuitry and connectors that enable you to exploit the advanced communications
features of the PIC32MX795F512L microcontroller on the Max32.
The Network Shield has a 10/100 Mbps Ethernet PHY to enable connection to an Ethernet network. It provides the
connectors and load switch to use the USB 2.0 On-The-Go (OTG) controller to implement a USB device, USB host,
or OTG operation. It also has two CAN transceivers and connectors to allow connection to two independent CAN
networks. Connectors are provided to enable connection to two of the I
2
C busses supported by the Max32.
In addition to the communications features, the Network Shield also has a 256Kbit I
2
C EEPROM for non-volatile
data storage and a 32.768 kHz oscillator for using the real-time clock/calendar (RTCC) peripheral in the PIC32
microcontroller.
The Network Shield has the same form factor as the Max32 board.
The chipKIT Network Shield board.
An SMSC LAN8720 10/100 Ethernet PHY
An RJ45 connector with integral magnetics
A USB device and host connectors
Two MCP2551 CAN transceivers
Two 12-pin header connectors for CAN
Two I
2
C daisy chain connectors
A 256Kbit I
2
C EEPROM
A 32.768 kHz oscillator
Vista de pagina 0
1 2 3 4 5 6 7 8 9 10

Indice de contenidos

Pagina 1 - Overview

1300 Henley Court Pullman, WA 99163 509.334.6306 www.digilentinc.com chipKIT™ Network Shield™ Board Reference Manual Revised December 29, 2014 This

Pagina 2

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 3 - 2.2 Ethernet Interface

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 4

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 5 - 2.3 USB Interface

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 6 - 2.4 CAN Interface

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 7

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 8 - 2.5.1 EEPROM

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 9 - 2.6 32.768 KHz Oscillator

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Pagina 10

chipKIT™ Network Shield™ Board Reference Manual Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trade

Comentarios a estos manuales

Sin comentarios